PRODUCT:
OdorCide EZ
15X is designed for use in food service and food preparation
facilities where organic odors and organic accumulation are
a problem. When used as directed, this formulation will
enzymatically clean hard surface areas, inanimate surfaces
such as floors, shower stalls, stools, and drains. In
addition, this formulation will deodorize those areas that
generally are hard to keep fresh smelling such as garbage
storage areas, empty garbage dumpsters and cans, rest rooms,
and other areas that are prone to odor caused by
microorganisms. OdorCideÔ EZ15X is a special blend of
enzymes, odor counteractants, and fragrances. OdorCide EZ
15X will incrementally breakdown and remove organic buildup
on the surface or in the drain.
APPLICATIONS:
Cleaner, mildewstat, and deodorizer of any waste system
where decaying organics generate odor.
« Meat Department
« Bakery/Deli
« Produce Department
« Dumpster
« Garbage Storage Areas
« Rest Rooms
« Empty Garbage Cans
« Basements |
DIRECTIONS FOR USE:
Drain Odor Control
Pour 60ml directly into drain. The frequency of
application depends upon organic accumulations in the drain
line. If there is just a small amount of odor-causing
organics in drain or P-trap one application may be
sufficient. For heavy organic accumulations, in the drain
line, repeat daily until drain runs free. NOTE: OdorCide EZ
15X should be used during the longest period of
non-use, generally at the close of the day.
Sufrace Odor Control
Pre-clean surface to be treated and thoroughly saturate
the area with OdorCide EZ 15X. Let stand wet for 15 minutes
and wipe off with a clean cloth or rinse with water. For
very porous surfaces or hard to clean areas, repeat daily
until the surfaces are clean and odor-free.
Cleaning
Hold container 15 to 20 cm from surface to be treated. Spray
area until it is covered with the solution. Allow product to
penetrate and remain wet for 10 minutes. No scrubbing is
necessary. Wipe off with a clean cloth, mop or sponge. The
product will not leave grit or soap scum. For heavily soiled
area, remove gross soil before treatment.
Mildewstat
To control mold and mildew on pre-cleaned, hard
non-porous surfaces spray surface to be treated making sure
to wet completely. Let air dry. Repeat application at weekly
intervals or when mildew growth appears. |
